ABR 3000 Abrasion Tester
The MonTech ABR 3000 abrasion tester is a tear testing instrument for determination of an elastomer’s resistance to frictional loss, using a rotating or fixed specimen in accordance with DIN 53516, DIN ISO 4649, AS1683.21 and ASTM D 5963. The test specimen is fixed into a quick clamp sample holder and precisely guided – either […]
Instrument upgrades and rebuilds
MonTech Repair, Rebuild and Upgrade Heavily used instruments that are worn or have suffered severe damage can easily be repaired on-site or in one of our local MonTech workshops. At the same time, instruments can be upgraded to PLC-based controller technology with digital data acquisition and the latest software systems. The total cost can be […]
Collin Pressure Filter Test
The COLLIN pressure filter test is used for determining quality differences in a polymer caused by agglomerates, insufficiently dispersed fillers resp. contaminations. A filter cassette in pre-heating position enables a quick and clean manual filter change without stopping the extruder. During the filter change, the melt is diverted via a bypass valve in front of […]
Collin Twin Screw Compounding Extruders
Collin compounders are used for continuous plasticising, mixing and dispersing, but also for alloying, degassing and chemical conversion or degradation. In this field, Collin provides maximum standards for technology and quality. Collin’s twin screw compounding extruders range from 12mm to 35mm dia with high performance versions capable of 500 deg C. The modular design means […]
MC15 HT Micro Compounder
The Xplore MC 15 HT is a 15ml micro compounder that will simplify and accelerate your R&D: it is stronger in shear, can handle higher viscosities, gives finer dispersion, better mixing and higher operational stability than ever before. Melt Torque is 43NM over almost the complete 1-500 rpm range Micro Compounder Specification: ● double rpm […]
MC40 Micro-Compounder
The Xplore MC40, is a 40 ml lab micro compounder. It is an essential piece of equipment for every R&D and quality control lab working with larger amounts of plastics, resins, compounds, elastomers, or film, filament and reactive extrusion. ● larger 40 ml batch size● rpm range (1-500), higher shear rates hence excellent dispersion, easier […]
Xplore Micro Injection Moulder
Xplore micro injection moulders with a shot volume of 5.5 or 12 ml can easily sit on your laboratory bench or in a hood. Our IM 5.5 and IM 12 machines fit seamlessly with our twin-screw compounders to streamline your R&D screening. The Xplore micro injection moulders allows you to test and evaluate new or […]
Coating Lines – reel-to-reel – Kroenert Group
KROENERT have been designing, developing, engineering and manufacturing bespoke reel-to-reel coating lines – for materials such as paper, foil and film – for nearly a century. RECO- A versatile line concept with a thousand solutions. With its outstanding flexibility and individual design, the RECO can handle all modern coating and laminating tasks. Line configuration is […]
Micro Fibre Line
The Xplore micro fibre line (FL) can produce fibres or mono filaments from just 5-10g of material in just 10 – 15 min, thus stretching the number of screenings and shrinking your development time. Our micro fibre spin device is fully compatible with our high precision micro compounders and extruders. Cutting edge laboratories use the […]
Drying – Reel-to-Reel – Drytec
Drytec offer reel to reel coating drying solutions to cater for any application. Part of the ATH Group (of which Kroenert are also a member), Drytec have years of experience in both application and implementation and offer the entire spectrum of drying technology systems. Depending on your needs, the design can utilise thermal dryers such […]